Ball Launcher using XRP

[SCSpaeth]

Ultrablox: Yes. In response to one of your posts, @TFossDK wrote about a project adding supplementary circuit boards to the XRP. I used one of the .stl files to make this modification of the holder.

(Where) is Qwiic demo code available (such as from the webinar)?

Hi Ultrablox, I did a writeup of my example that was shown during the webinar where i included the RGB encoder, Screen and buzzer. The writeup is on DigiKey’s Maker.io website, Innovate with Ease: XRP, Qwiic Encoder, OLED, & Buzzer Guide (digikey.com)