# V1.51 Battery Cover

**URL:** <https://xrp.discourse.group/t/v1-51-battery-cover/619>\
**Category:** Hardware\
**Created:** [February 11, 2025, 10:01pm UTC](https://xrp.discourse.group/t/v1-51-battery-cover/619 "2025-02-11T22:01:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vicemeaningfullyable](https://yyz1.discourse-cdn.com/flex011/user_avatar/xrp.discourse.group/vicemeaningfullyable/32/237_2.png) [@vicemeaningfullyable](https://xrp.discourse.group/u/vicemeaningfullyable)\
**Post date:** [February 11, 2025, 10:01pm UTC](https://xrp.discourse.group/t/v1-51-battery-cover/619/1 "2025-02-11T22:01:02Z")

</div>

I recenetly purchased some additional XRP bots and it looks like the battery cover has been redesigned somehow. There is now whole though which we can put the battery cover “tongue” and instead there a new thin piece that I don’t know whow it attaches?

Can anyone direct me to any 1.51 documentation? All the assembly docs and videos I see use the old cover.

---

<div class="post-metadata">

**Author:** ![Fgrossman](https://avatars.discourse-cdn.com/v4/letter/f/b77776/32.png) [@Fgrossman](https://xrp.discourse.group/u/Fgrossman)\
**Post date:** [February 11, 2025, 10:53pm UTC](https://xrp.discourse.group/t/v1-51-battery-cover/619/2 "2025-02-11T22:53:47Z")

</div>

If you go to 2.45 on this video it shows how to put it in. We are working on further documentation.

[![](https://canada1.discourse-cdn.com/flex011/uploads/xrp/original/1X/cef4278cc4efa07264486e9760b66faf9c57e54d.jpeg "3D Printing the XRP ROBOT!") ](https://www.youtube.com/watch?v=o8pBWHlgDqs)