# Update to 1.23.0 failing in XRP Code Editor

**URL:** <https://xrp.discourse.group/t/update-to-1-23-0-failing-in-xrp-code-editor/599>\
**Category:** Support\
**Created:** [January 18, 2025, 10:11pm UTC](https://xrp.discourse.group/t/update-to-1-23-0-failing-in-xrp-code-editor/599 "2025-01-18T22:11:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jakeematias](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@jakeematias](https://xrp.discourse.group/u/jakeematias)\
**Post date:** [January 18, 2025, 10:11pm UTC](https://xrp.discourse.group/t/update-to-1-23-0-failing-in-xrp-code-editor/599/1 "2025-01-18T22:11:28Z")

</div>

When I connect to my XRP using USB it says that it needs an update. When I select RPI-RP2 it begins to update but then gives me a message saying “Error updating MicroPython. Please try again”. I never “click on ‘Edit Files’ and wait for the XRP to connect” like it says in the instruction message when I start the update.

 ![Screenshot 2025-01-18 at 5.03.28 PM](https://canada1.discourse-cdn.com/flex011/uploads/xrp/original/1X/f5866f39c131903a24c031918e0a07b0b264b5ba.png)

Thanks for the help!  
Jake

---

<div class="post-metadata">

**Author:** ![Fgrossman](https://avatars.discourse-cdn.com/v4/letter/f/b77776/32.png) [@Fgrossman](https://xrp.discourse.group/u/Fgrossman)\
**Post date:** [January 18, 2025, 10:37pm UTC](https://xrp.discourse.group/t/update-to-1-23-0-failing-in-xrp-code-editor/599/2 "2025-01-18T22:37:24Z")

</div>

What type of machine are you on?

---

<div class="post-metadata">

**Author:** ![jakeematias](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@jakeematias](https://xrp.discourse.group/u/jakeematias)\
**Post date:** [February 11, 2025, 4:01am UTC](https://xrp.discourse.group/t/update-to-1-23-0-failing-in-xrp-code-editor/599/3 "2025-02-11T04:01:14Z")

</div>

It seems like It’s a beta unit - XRP-3182c shows up in the top right corner of the XRP code editor

---

<div class="post-metadata">

**Author:** ![jakeematias](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@jakeematias](https://xrp.discourse.group/u/jakeematias)\
**Post date:** [February 11, 2025, 4:55am UTC](https://xrp.discourse.group/t/update-to-1-23-0-failing-in-xrp-code-editor/599/4 "2025-02-11T04:55:29Z")

</div>

Completely resetting the RPi pico fixed the problem for me.

I used this file (nuke.uf2) to reset the control board - hold down the BOOTSEL button and while doing so quickly press the reset button to make the robot accessible on your computer. then drag and drop nuke.uft into the RPI-RP2 folder

Then reflash the most recent RPi firmware onto the robot by repeating the above process with [MicroPython for the Pico W](https://projects.raspberrypi.org/en/projects/get-started-pico-w/1).

Then after reopening the XRP code editor I was able to successfully update.