# Did not get sensor cables in my kit

**URL:** <https://xrp.discourse.group/t/did-not-get-sensor-cables-in-my-kit/568>\
**Category:** Robot Hardware\
**Created:** [December 7, 2024, 7:51pm UTC](https://xrp.discourse.group/t/did-not-get-sensor-cables-in-my-kit/568 "2024-12-07T19:51:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Doc](https://avatars.discourse-cdn.com/v4/letter/d/f07891/32.png) [@Doc](https://xrp.discourse.group/u/Doc)\
**Post date:** [December 7, 2024, 7:51pm UTC](https://xrp.discourse.group/t/did-not-get-sensor-cables-in-my-kit/568/1 "2024-12-07T19:51:38Z")

</div>

Hi,

One of my XRP kits did not have the sensor cables. Can I purchase them separately? Or, can anyone tell me what the board connector is so I can make my own?

Doc

---

<div class="post-metadata">

**Author:** ![SparkFro](https://yyz1.discourse-cdn.com/flex011/user_avatar/xrp.discourse.group/sparkfro/32/12_2.png) [@SparkFro](https://xrp.discourse.group/u/SparkFro)\
**Post date:** [December 9, 2024, 4:22pm UTC](https://xrp.discourse.group/t/did-not-get-sensor-cables-in-my-kit/568/2 "2024-12-09T16:22:16Z")

</div>

Sorry to hear your cables were missing! If you make a post on the [SparkFun community forum](https://community.sparkfun.com/), the support folks there should be able to get you a new cable.

If you prefer to make an additional purchase, the cables are available here: [Flexible Qwiic Cable - Female Jumper (4-pin, Heat Shrink) - CAB-22726 - SparkFun Electronics](https://www.sparkfun.com/products/22726)

Or if you want to make your own, the connector is a 4-pin JST-SH.